[modules]
log_file
radius
sigchld
shaper

[core]
log-error=/var/log/accel-ppp/core.log
thread-count=2

[dns]
dns1=10.0.0.2
dns2=4.2.2.2

[radius]
dictionary=/usr/local/share/accel-ppp/radius/dictionary
nas-identifier=accel
nas-ip-address=10.0.0.2
server=10.0.0.1,secret,auth-port=1812,acct-port=1813,req-limit=0,fail-time=0
dae-server=0.0.0.0:3799,secret
timeout=10
max-try=3
acct-timeout=0
acct-delay-time=0
verbose=1

[shaper]
attr=Filter-Id
#Day/Night shaper
#time-range=1,1:00-3:00
#time-range=2,3:00-5:00
#time-range=3,5:00-7:00
ifb=ifb0
up-limiter=htb
down-limiter=htb
cburst=1375000
r2q=10
quantum=1500
leaf-qdisc=sfq perturb 10
verbose=0

[client-ip-range]
disable

[log]
log-file=/var/log/accel-ppp/accel.log
log-emerg=/var/log/accel-ppp/emerg.log
log-fail-file=/var/log/accel-ppp/auth-fail.log
log-debug=/var/log/accel-ppp/debug.log
copy=1
level=4

[cli]
telnet=127.0.0.1:2000
tcp=127.0.0.1:2001

Для активации авторизации по PPPoE, к основным настройкам необходимо добавить:

[modules]
pppoe
auth_pap
auth_chap
auth_chap_md5
auth_mschap_v1
auth_mschap_v2

[ppp]
verbose=0
min-mtu=1280
mtu=1472
mru=1472
mppe=prefer
ipv4=require
ipv6=deny
ipv6-intf-id=0:0:0:1
ipv6-peer-intf-id=0:0:0:2
ipv6-accept-peer-intf-id=1
lcp-echo-interval=10
lcp-echo-failure=3
lcp-echo-timeout=45

[pppoe]
verbose=1
ac-name=accelnet
ifname-in-sid=called-sid
called-sid=ifname
interface=eth1.10

[radius]
#шлюз для PPPoE абонентов
gw-ip-address=172.31.255.254

Для активации авторизации по Mac, к основным настройкам необходимо добавить:

[modules]
ipoe

[ipoe]
lua-file=/etc/accel-ppp.lua
lease-time=300
max-lease-time=302
attr-dhcp-client-ip=Framed-IP-Address
attr-dhcp-router-ip=DHCP-Router-IP-Address
attr-dhcp-mask=DHCP-Mask
attr-l4-redirect=L4-Redirect
attr-l4-redirect-ipset=L4-Redirect-ipset
l4-redirect-ipset=l4
proto=100
proxy-arp=1
interface=eth1.10,mode=L2,start=dhcpv4,shared=1,ifcfg=1,username=lua:macuser
verbose=1

Для активации авторизации по IP, к основным настройкам необходимо добавить:

[modules]
ipoe

[ipoe]
attr-l4-redirect=L4-Redirect
attr-l4-redirect-ipset=L4-Redirect-ipset
l4-redirect-ipset=l4
proto=100
# proxy-arp выключен, иначе параметр local-net не будет работать корректно.
proxy-arp=0
interface=eth1.10,mode=L3,start=up,shared=1,ifcfg=1
local-net=10.1.0.0/16
gw-ip-address=10.1.255.254/16
verbose=1

Для активации авторизации по vlan, к основным настройкам необходимо добавить:

[modules]
ipoe

[ipoe]
lease-time=300
max-lease-time=302
attr-dhcp-client-ip=Framed-IP-Address
attr-dhcp-router-ip=DHCP-Router-IP-Address
attr-dhcp-mask=DHCP-Mask
attr-l4-redirect=L4-Redirect
attr-l4-redirect-ipset=L4-Redirect-ipset
l4-redirect-ipset=l4
proto=100
#proxy-arp=0
vlan-timeout=600
vlan-name=%I.%N
vlan-mon=re:eth1.10,100-199
interface=re:eth1.10.1[0-9][0-9],mode=L2,start=dhcpv4,shared=0,ifcfg=1,username=ifname
verbose=1